Home / Services / GPR Concrete Scanning

GPR Concrete Scanning Before You Core or Cut

Scan before you core or cut. We map rebar, post-tension tendons and conduit in slabs and walls across Metro Vancouver, the Fraser Valley and BC, and produce sketches your structural engineer can design from.

Why Scan First

Cutting a post-tension tendon or a live conduit is expensive and dangerous. A scan before coring, saw cutting or anchoring shows where the embedded items are, so the hole goes where it is safe.

Ground penetrating radar uses no radiation, so the area does not need to be cleared the way it does for X-ray, and the crew can keep working nearby.

What We Scan For

  • Rebar layout and spacing
  • Post-tension tendons
  • Electrical conduit and embedded services
  • Clear zones for cores, cuts and anchors

How It Works

  1. Mark the work areaYou show us the core or cut locations, or the area to clear.
  2. ScanWe scan the area in a grid and read the results on site.
  3. Mark the slabFindings are marked directly on the concrete so the coring crew can work from them.
  4. Sketch for the engineerWhere design needs it, we produce a sketch or CAD drawing of the embedded items.

Related Work

  • Squamish Soil Nail Wall for MatconMatcon · Squamish, BCA project that combined several specialized services: drafting, volume calculations, utility locating, ground penetrating radar and as-built reporting.Read the project
  • Construction of the new terminal facilities on Burrard Inlet
    Suncor Burrard TerminalPCL Industrial · Port Moody, BC · 2019–2020Accurate rail layout for Suncor's Burrard Products Terminal, with quality control concrete testing.Read the project

Questions

Concrete Scanning Questions

Can you scan post-tensioned slabs?

Yes. Mapping tendons before coring or cutting is one of the most common reasons we are called.

Is GPR safe to use near my crew?

Yes. GPR does not use radiation, so there is no exclusion zone like X-ray, and other trades can keep working.

Are there limits to what GPR can see?

Yes. Dense or layered rebar can hide items below it, and very thick or wet concrete reduces depth. We tell you on site when a result is not certain.

Do you provide drawings?

Yes. Along with marks on the concrete, we can produce sketches or CAD drawings for the structural engineer.

How fast can you come out?

Call the Langley office with the location and number of cores and we'll give you the earliest date we can be there.

Service Area

Based in Langley. Working Across BC and Alberta.

Our Langley crews cover Metro Vancouver, the Fraser Valley and the Sea to Sky. Our Edmonton office covers Alberta. We also travel to mine, industrial and remote sites across both provinces.

  • Vancouver
  • Burnaby
  • Richmond
  • Delta
  • Surrey
  • Langley
  • Abbotsford
  • Chilliwack
  • Hope
  • Maple Ridge
  • Coquitlam
  • Port Moody
  • Port Coquitlam
  • North Vancouver
  • West Vancouver
  • Squamish

Related services

Coring or Cutting Soon?

Send the drawings, site address and dates. We'll come back with a scope and price.

Request a Quote